Fermilab Fermilab Core Computing Division

Library Home |  Ask a Librarian library@fnal.gov |  Book Catalog |  Library Journals |  Requests |  SPIRES |  Fermilab Documents |

Fermilab Library
SPIRES-BOOKS: FIND KEYWORD COMPUTER AIDED DESIGN *END*INIT* use /tmp/qspiwww.webspi1/19478.169 QRY 131.225.70.96 . find keyword computer aided design ( in books using www Cover
Image
Call number:TK7871.96.M53G74::2007 Show nearby items on shelf
Title:RF and microwave transistor oscillator design
Author(s): Andrei Grebennikov
Date:2007
Publisher:Chichester : John Wiley
Size:441 p.
Contents:Preface. -- Acknowledgements. -- 1 Nonlinear circuit design methods. -- 1.1 Spectral domain analysis. -- 1.2 Time domain analysis. -- 1.3 Newton Raphson algorithm. -- 1.4 Quasilinear method. -- 1.5 Van der Pol method. -- 1.6 Computer aided analysis and design. -- 2 Oscillator operation and design principles. -- 2.1 Steady state operation mode. -- 2.2 Start up conditions. -- 2.3 Oscillator configurations and historical aspects. -- 2.4 Self bias condition. -- 2.5 Oscillator analysis using matrix techniques. -- 2.6 Dual transistor oscillators. -- 2.7 Transmission line oscillator. -- 2.8 Push push oscillator. -- 2.9 Triple push oscillator. -- 2.10 Oscillator with delay line
3.1 Negative resistance oscillator circuits. -- 3.2 General single frequency stability condition. -- 3.3 Single resonant circuit oscillators. -- 3.4 Double resonant circuit oscillator. -- 3.5 Stability of multi resonant circuits. -- 3.6 Phase plane method. -- 3.7 Nyquist stability criterion. -- 3.8 Start up and stability. -- 4 Optimum design and circuit technique. -- 4.1 Empirical optimum design approach. -- 4.2 Analytic optimum design approach. -- 4.3 Parallel feedback oscillators. -- 4.4 Series feedback bipolar oscillators. -- 4.5 Series feedback MESFET oscillators. -- 4.6 High efficiency design technique. -- 4.7 Practical oscillator schematics. -- 5 Noise in oscillators. -- 5.1 Noise figure. -- 5.2 Flicker noise. -- 5.3 Active device noise modelling. -- 5.4 Oscillator noise spectrum: linear model. -- 5.5 Oscillator noise spectrum: nonlinear model. -- 5.6 Loaded quality factor. -- 5.7 Amplitude to phase conversion. -- 5.8 Oscillator pulling figure. -- 6 Varactor and oscillator frequency tuning. -- 6.1 Varactor modelling. -- 6.2 Varactor nonlinearity. -- 6.3 Frequency modulation. -- 6.4 Anti series varactor pair. -- 6.5 Tuning linearity. -- 6.6 Reactance compensation technique. -- 6.7 Practical VCO schematics.
7 CMOS voltage controlled oscillators. -- 7.1 MOS varactor. -- 7.2 Phase noise. -- 7.3 Flicker noise. -- 7.4 Tank inductor. -- 7.5 Circuit design concepts and technique. -- 7.6 Implementation technology issues. -- 7.7 Practical schematics of CMOS VCOs. -- 8 Wideband voltage controlled oscillators. -- 8.1 Main requirements. -- 8.2 Single resonant circuits with lumped elements. -- 8.3 Double resonant circuit with lumped elements. -- 8.4 Transmission line circuit realization. -- 8.5 VCO circuit design aspects. -- 8.6 Wideband nonlinear design. -- 8.7 Dual mode varactor tuning. -- 8.8 Practical RF and microwave wideband VCOs. -- -- 9 Noise reduction techniques. -- 9.1 Resonant circuit design technique. -- 9.2 Low frequency loading and feedback optimization. -- 9.3 Filtering technique. -- 9.4 Noise shifting technique. -- 9.5 Impedance noise match
ISBN:9780470025352
Keywords: Microwave transistors. , Radio frequency oscillators. , Oscillators, Transistor.
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Location: MAIN

Cover Image
Call number:TA174.EN13::1983 Show nearby items on shelf
Title:Computer aided design : fundamentals and system architectures
Author(s): Jose Luis Encarnacao
E.G. Schlechtendahl
Date:1983
Publisher:Springer-Verlag, Berlin
Size:346
ISBN:0387115269
Series:Symbolic computation. v. 165
Keywords: Engineering design Data processing.
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
Location: MAIN

Cover
Image
Call number:SPRINGER-2014-9781493908080:ONLINE Show nearby items on shelf
Title:Optimization in Science and Engineering [electronic resource] : In Honor of the 60th Birthday of Panos M. Pardalos
Author(s): Themistocles M Rassias
Christodoulos A Floudas
Sergiy Butenko
Date:2014
Publisher:New York, NY : Springer New York : Imprint: Springer
Size:1 online resource
Note:Optimization in Science and Engineering is dedicated in honor of the 60th birthday of Distinguished Professor Panos M. Pardalos. Pardaloss past and ongoing work has made a significant impact on several theoretical and appliedareas in modern optimizat ion. As tribute to the diversity of Dr. Pardaloss work in Optimization, this book comprises a collection of contributions from experts in various fields of this rich and diverse area of science. Topicshighlight recent developments and include: Determinist ic global optimization Variational inequalities and equilibrium problems Approximation and complexity in numerical optimization Non-smooth optimization Statistical models and datamining Applications of optimization in medicine, energy systems, and complex network analysis This volume will be of great interest to graduate students, researchers, and practitioners, in the fields of optimization and engineering
Contents:Piecewise Linear Classifiers Based on Nonsmooth Optimization Approaches
Variational Inequality Models Arising in the Study of Viscoelastic Materials
Neighboring Local Optimal Solutions and Its Applications
General Traffic Equilibrium Problem with Uncertainty and Random Variational Inequalities
Computational Complexities of Optimization Problems Related to Model Based Clustering of Networks
On Distributed
Lag Modeling Algorithms by r
Convexity and Piecewise Monotonicity
Poincar
Type Inequalities for Greens Operator on Harmonic Forms
The Robustness Concern in Preference
ISBN:9781493908080
Series:eBooks
Series:SpringerLink
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Software engineering , Computer science , Computer aided design , Mathematical optimization
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2014-9781447164616:ONLINE Show nearby items on shelf
Title:Future Vision and Trends on Shapes, Geometry and Algebra [electronic resource]
Author(s): Raffaele Amicis
Giuseppe Conti
Date:2014
Publisher:London : Springer London : Imprint: Springer
Size:1 online resource
Note:Mathematical algorithms are a fundamental component of Computer Aided Design and Manufacturing (CAD/CAM) systems. This book provides a bridge between algebraic geometry and geometric modelling algorithms, formulated within acomputer science framework . Apart from the algebraic geometry topics covered, the entire book is based on the unifying concept of using algebraic techniques properly specialized to solve geometric problems to seriously improveaccuracy, robustness and efficiency of CAD-systems. I t provides new approaches as well as industrial applications to deform surfaces when animating virtual characters, to automatically compare images of handwritten signatures, and toimprove control of NC machines. This book further introduces a noteworthy r epresentation based on 2D contours, which is essential to model the metal sheet in industrial processes. It additionally reviews applications of numericalalgebraic geometry to differential equations systems with multiple solutions and bifurcations. Future Vision and Trends on Shapes, Geometry and Algebra is aimed specialists in the area of mathematics and computer science on the onehand and on the other hand at those who want to become familiar with the practical application of algebraic geometry and geom etric modelling such as students, researchers, and doctorates
Contents:Introduction
Future Shape Modelling Scenarios
A Hilbert
Driven Strategy for Signature
based Grbner Basis Algorithms
Numerical Algebraic Geometry and Differential Equations
Sparse Discriminants and Applications
Parametrization of the Bisector of Two Low Degree Surfaces
Computer Aided Algebraic Geometry: Constructing Surfaces of Genus Zero
Elastic Bone Transformation for Realistic Facial Animation in Web GL
Geometric Features for Hand
Written Signatures
Using 2D Contours to Model Metal Sheets in Industrial Machining Processes
The Case for Scripted Process Design a
ISBN:9781447164616
Series:eBooks
Series:SpringerLink
Series:Springer Proceedings in Mathematics & Statistics, 2194-1009 : v84
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Geometry, algebraic , Field theory (Physics) , Algorithms , Geometry
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2013-9789400766648:ONLINE Show nearby items on shelf
Title:Numerical Methods for Metamaterial Design [electronic resource]
Author(s): Kenneth Diest
Date:2013
Publisher:Dordrecht : Springer Netherlands : Imprint: Springer
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:This book describes a relatively new approach for the design of electromagnetic metamaterials. Numerical optimization routines are combined with electromagnetic simulations to tailor the broadband optical properties of ametamaterial to have predeterm ined responses at predetermined wavelengths. After a review of both the major efforts within the field of metamaterials and the field of mathematical optimization, chapters covering both gradient-based andderivative-free design methods are considered. Sel ected topics including surrogate-base optimization, adaptive mesh search, and genetic algorithms are shown to be effective, gradient-free optimization strategies. Additionally, newtechniques for representing dielectric distributions in two dimensions, inc luding level sets, are demonstrated as effective methods for gradient-based optimization. Each chapter begins with a rigorous review of the optimizationstrategy used, and is followed by numerous examples that combine the strategy with either electromagnet ic simulations or analytical solutions of the scattering problem. Throughout the text, we address the strengths and limitations ofeach method, as well as which numerical methods are best suited for different types of metamaterial designs. This book is int ended to provide a detailed enough treatment of the mathematical methods used, along with sufficientexamples and additional references, that senior level undergraduates or graduate students who are new to the fields of plasmonics, metamaterials, or optimi zation methods have an understanding of which approaches are best-suited fortheir work and how to implement the methods themselves
Note:Springer eBooks
Contents:1 Introduction K.Diest
2 An Overview of Mathematical Methods for Numerical Optimization D.E. Marthaler
3 Optimization with Surrogate Models T.Schaul
4 Nonsmooth Optimization by Mesh Adaptive Direct Search C.Audet, K.Diest, S. Le Digabel, L.A. Sweatlock, and D.E. Marthaler
5 Nature Inspired Optimization Techniques for Metamaterial Design D. H. Werner, J.A. Bossard, Z.Bayraktar, Z.H. Jiang, M.D. Gregory, and P.L. Werner
6 Objective
First Nanophotonic Design J. Lu and J. Vuckovic
7 Gradient Based Optimization Methods for Metamaterial Design W. Chen, K.Diest, C
Y. Kao, D
ISBN:9789400766648
Series:e-books
Series:SpringerLink (Online service)
Series:Topics in Applied Physics, 0303-4216 : v127
Series:Physics and Astronomy (Springer-11651)
Keywords: Computer aided design , Microwaves , Optical materials
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2013-9783642352751:ONLINE Show nearby items on shelf
Title:Domain Decomposition Methods in Science and Engineering XX [electronic resource]
Author(s): Randolph Bank
Michael Holst
Olof Widlund
Jinchao Xu
Date:2013
Publisher:Berlin, Heidelberg : Springer Berlin Heidelberg : Imprint: Springer
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:These are the proceedings of the 20th international conference on domain decomposition methods in science and engineering. Domain decomposition methods are iterative methods for solving the often very large linearor nonlinearsystems of algebraic equa tions that arise when various problems in continuum mechanics are discretized using finite elements. They are designed for massively parallel computers and take the memory hierarchy of such systems in mind.This is essential for approaching peak floating p oint performance. There is an increasingly well developed theory whichis having a direct impact on the development and improvements of these algorithms
Note:Springer eBooks
Contents:Preface
Part I: Plenary Presentations
Part II: Minisymposia
Part III: Contributed Presentations
ISBN:9783642352751
Series:e-books
Series:SpringerLink (Online service)
Series:Lecture Notes in Computational Science and Engineering, 1439-7358 : v91
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer aided design , Differential equations, partial , Computer science Mathematics , Computer science
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2013-9783642332876:ONLINE Show nearby items on shelf
Title:The Finite Element Method: Theory, Implementation, and Applications [electronic resource]
Author(s): Mats G Larson
Fredrik Bengzon
Date:2013
Publisher:Berlin, Heidelberg : Springer Berlin Heidelberg : Imprint: Springer
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:This book gives an introduction to the finite element method as a general computational method for solving partial differential equations approximately. Our approach is mathematical in nature with a strong focus on the underlyingmathematical principl es, such as approximation properties of piecewise polynomial spaces, and variational formulations of partial differential equations, but with a minimum level of advanced mathematical machinery from functionalanalysis and partial differential equations. In principle, the material should be accessible to students with only knowledge of calculus of several variables, basic partial differential equations, and linear algebra, as the necessaryconcepts from more advanced analysis are introduced when needed. Thro ughout the text we emphasize implementation of the involved algorithms, and have therefore mixed mathematical theory with concrete computer code using the numericalsoftware MATLAB is and its PDE-Toolbox. We have also had the ambition to cover some of the most important applications of finite elements and the basic finite element methods developed for those applications, including diffusion andtransport phenomena, solid and fluid mechanics, and also electromagnetics.
Note:Springer eBooks
Contents:1. Piecewise Polynomial Approximation in 1D
2. The Finite Element Method in 1D
3. Piecewise Polynomial Approximation in 2D
4. The Finite Element Method in 2D
5. Time
dependent Problems
6. Solving Large Sparse Linear Systems
7. Abstract Finite Element Analysis
8. The Finite Element
9. Non
linear Problems
10. Transport Problems
11. Solid Mechanics
12. Fluid Mechanics
13. Electromagnetics
14. Discontinuous Galerkin Methods
A. Some Additional Matlab Code
References
ISBN:9783642332876
Series:e-books
Series:SpringerLink (Online service)
Series:Texts in Computational Science and Engineering, 1611-0994 : v10
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer aided design , Differential equations, partial , Computer science Mathematics , Computer science , Mechanics, applied
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2012-9783834824455:ONLINE Show nearby items on shelf
Title:Adaptive Hierarchical Isogeometric Finite Element Methods [electronic resource]
Author(s): Anh-Vu Vuong
Date:2012
Publisher:Wiesbaden : Vieweg+Teubner Verlag
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:Isogeometric finite elements combine the numerical solution of partial differential equations and the description of the computational domain given by rational splines from computer aided geometric design. This work gives awell-founded introduction t o this topic and then extends isogeometric finite elements by a local refinement technique, which is essential for an efficient adaptive simulation. Thereby a hierarchical approach is adapted to the numericalrequirements and the relevant theoretical prope rties of the basis are ensured. The computational results suggest the increased efficiency and the potential of this local refinement method
Note:Springer eBooks
ISBN:9783834824455
Series:e-books
Series:SpringerLink (Online service)
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2010-9783642136481:ONLINE Show nearby items on shelf
Title:Analysis and Design of Univariate Subdivision Schemes [electronic resource]
Author(s): Malcolm Sabin
Date:2010
Publisher:Berlin, Heidelberg : Springer Berlin Heidelberg
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:This book covers the theory of subdivision curves in detail, which is a prerequisite for that of subdivision surfaces. The book reports on the currently known ways of analysing a subdivision scheme (i.e. measuring criteria whichmight be important for the application of a scheme to a given context). It then goes on to consider how those analyses can be used in reverse to design a scheme best matching the particular criteria for a given application. The book ispresented in an accessible fashion, even f or those whose mathematics is a tool to be used, not a way of life. It should provide the reader with a full and deep understanding of the state-of-the-art in subdivision analysis, and separatesections on mathematical techniques provide revision for those needing it. The book will be of great interest to those starting to do research in CAD/CAE. It will also appeal to those lecturing in this subject and industrial workersimplementing these methods. The author has spent his professional life on the numeric al representation of shape and his book fills a need for a book covering the fundamental ideas in the simplest possible context, that of curves
Note:Springer eBooks
Contents:Introduction
Part I. Prependices
Part II. Dramatis Personae
Part III. Analyses
Part IV. Design
Part V. Implementation
Part VI. Appendices
References
Index
ISBN:9783642136481
Series:e-books
Series:SpringerLink (Online service)
Series:Geometry and Computing, 1866-6795 : v6
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer simulation , Computer graphics , Computer aided design , Visualization , Numerical analysis , Geometry
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2008-9783540764069:ONLINE Show nearby items on shelf
Title:Subdivision Surfaces [electronic resource]
Author(s): Jrg Peters
Ulrich Reif
Date:2008
Publisher:Berlin, Heidelberg : Springer Berlin Heidelberg
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:Since their first appearance in 1974, subdivision algorithms for generating surfaces of arbitrary topology have gained widespread popularity in computer graphics and are being evaluated in engineering applications. Thisdevelopment was complemented by ongoing efforts to develop appropriate mathematical tools for a thorough analysis, and today, many of the fascinating properties of subdivision are well understood. This book summarizes the currentknowledge on the subject. It contains both meanwhile clas sical results as well as brand-new, unpublished material, such as a new framework for constructing C^2-algorithms. The focus of the book is on the development of a comprehensivemathematical theory, and less on algorithmic aspects. It is intended to serve researchers and engineers - both new to the beauty of the subject - as well as experts, academic teachers and graduate students or, in short, anybody who isinterested in the foundations of this flourishing branch of applied geometry
Note:Springer eBooks
ISBN:9783540764069
Series:e-books
Series:SpringerLink (Online service)
Series:Geometry and Computing, 1866-6795 : v3
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer vision , Computer aided design , Visualization , Geometry , Engineering , Industrial engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2008-9783540733980:ONLINE Show nearby items on shelf
Title:Pythagorean-Hodograph Curves: Algebra and Geometry Inseparable [electronic resource]
Author(s): Rida T Farouki
Date:2008
Publisher:Berlin, Heidelberg : Springer Berlin Heidelberg
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:By virtue of their special algebraic structures, Pythagorean-hodograph (PH) curves offer unique advantages for computer-aided design and manufacturing, robotics, motion control, path planning, computer graphics, animation, andrelated fields. This boo k offers a comprehensive and self-contained treatment of the mathematical theory of PH curves, including algorithms for their construction and examples of their practical applications. Special features includean emphasis on the interplay of ideas from alg ebra and geometry and their historical origins, detailed algorithm descriptions, and many figures and worked examples. The book may appeal, in whole or in part, to mathematicians, computerscientists, and engineers
Note:Springer eBooks
Contents:Algebra
Preamble
Polynomials
Complex Numbers
Quaternions
Clifford Algebra
Geometry
Coordinate Systems
Differential Geometry
Algebraic Geometry
NonEuclidean Geometry
Computer Aided Geometric Design
The Bernstein Basis
Numerical Stability
Bzier Curves and Surfaces
C2 Cubic Spline Curves
Spline Basis Functions
Planar Pythagorean
hodograph Curves
Arclength Parameterization
Pythagoreanhodograph Curves
Tschirnhausen's Cubic
Complex Representation
Rational Pythagorean
hodograph Curves
Spatial Pythagorean
hodograph Curves
ISBN:9783540733980
Series:e-books
Series:SpringerLink (Online service)
Series:Geometry and Computing, 1866-6795 : v1
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer vision , Algebra , Computer science Mathematics , Geometry , Engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2008-9781402068430:ONLINE Show nearby items on shelf
Title:Field Models in Electricity and Magnetism [electronic resource]
Author(s): Paolo Barba
Antonio Savini
Slawomir Wiak
Date:2008
Publisher:Dordrecht : Springer Netherlands
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:Springer eBooks
ISBN:9781402068430
Series:e-books
Series:SpringerLink (Online service)
Series:Physics and Astronomy (Springer-11651)
Keywords: Computer simulation , Computer aided design , Engineering , Microwaves , Electric engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2008-9780817647032:ONLINE Show nearby items on shelf
Title:Shape-Preserving Approximation by Real and Complex Polynomials [electronic resource]
Author(s): Sorin G Gal
Date:2008
Publisher:Boston, MA : Birkhuser Boston
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:This monograph presents the first comprehensive treatment in book form of shape-preserving approximation by real or complex polynomials in one or several variables. Such approximation methods are useful in many problems thatarise in science and engin eering and require an optimal mathematical representation of physical reality. The main topics are structured in four chapters, followed by an appendix: shape-preserving approximation and interpolation of realfunctions of one real variable by real polynom ials shape-preserving approximation of real functions of several real variables by multivariate real polynomials shape-preserving approximation of analytic functions of one complexvariable by complex polynomials in the unit disk and shape-preserving appro ximation of analytic functions of several complex variables on the unit ball or the unit polydisk by polynomials of several complex variables. The appendixtreats related results of non-polynomial and non-spline approximations preserving shape including th ose by complexified operators with applications to complex partial differential equations. Shape-Preserving Approximation by Real andComplex Polynomials contains many open problems at the end of each chapter to stimulate future research along with a rich and updated bibliography surveying the vast literature. The text will be useful to graduate students andresearchers interested in approximation theory, mathematical analysis, numerical analysis, computer aided geometric design, robotics, data fitting, che mistry, fluid mechanics, and engineering
Note:Springer eBooks
Contents:Preface
Shape Preserving Approximation by Real Univariate Polynomials
Shape Preserving Approximation by Real Multivariate Polynomials
Shape Preserving Approximation by Complex Univariate Polynomials
Shape Preserving Approximation by Complex Multivariate Polynomials
Appendix: Some Related Topics
References
Index
ISBN:9780817647032
Series:e-books
Series:SpringerLink (Online service)
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer science , Functions of complex variables , Computer science Mathematics , Engineering mathematics
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2007-9780387491592:ONLINE Show nearby items on shelf
Title:An Introduction to Scientific Computing [electronic resource] Twelve Computational Projects Solved with MATLAB
Author(s): Ionut Danaila
Pascal Joly
Sidi Mahmoud Kaber
Marie Postel
Date:2007
Publisher:New York, NY : Springer New York
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:This book provides twelve computational projects aimed at numerically solving problems from a broad range of applications including Fluid Mechanics, Chemistry, Elasticity, Thermal Science, Computer Aided Design, Signal and ImageProcessing. For each p roject the reader is guided through the typical steps of scientific computing from physical and mathematical description of the problem, to numerical formulation and programming and finally to critical discussionof numerical results. Considerable emphasis is placed on practical issues of computational methods. The last section of each project contains the solutions to all proposed exercises and guides the reader in using the MATLAB scripts.The mathematical framework provides a basic foundation in the subj ect of numerical analysis of partial differential equations and main discretization techniques, such as finite differences, finite elements, spectral methods andwavelets). The book is primarily intended as a graduate-level text in applied mathematics, but it may also be used by students in engineering or physical sciences. It will also be a useful reference for researchers and practicingengineers
Note:Springer eBooks
Contents:Numerical Approximation of Model Partial Differential Equations
Nonlinear Differential Equations: Application to Chemical Kinetics
Polynomial Approximation
Solving an Advection
Diffusion Equation by A Finite Element Method
Solving A Differential Equation by A Spectral Method
Signal Processing: Multiresolution Analysis
Elasticity: Elastic Deformation of A Thin Plate
Domain Decomposition Using A Schwarz Method
Geometrical Design: Bezier Curves and Surfaces
Gas Dynamics: Riemann Problem and Discontinuous Solutions: Application to The Shock Tube Problem
Thermal Engineer
ISBN:9780387491592
Series:e-books
Series:SpringerLink (Online service)
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer science Mathematics , Numerical analysis , Mathematical physics
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2005-9783540271574:ONLINE Show nearby items on shelf
Title:Computational Methods for Algebraic Spline Surfaces [electronic resource] : ESF Exploratory Workshop
Author(s): Tor Dokken
Bert Jttler
Date:2005
Publisher:Berlin, Heidelberg : Springer Berlin Heidelberg
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:The papers included in this volume provide an overview about the state-of-the-art in approximative implicitization and various related topics, including both the theoretical basis and the existing computational techniques. Thenovel idea of approximat e implicitization has strengthened the existing link between Computer Aided Geometric Design and classical algebraic geometry. There is a growing interest from researchers and professionals both in CAGD andAlgebraic Geometry, to meet and combine knowledge and ideas, in order to better solve industrial--type challenges, as well as to initiate new directions for basic research. This volume will support this exchange of ideas between thevarious communities
Note:Springer eBooks
Contents:Approximate Parametrisation of Confidence Sets
Challenges in Surface
Surface Intersections
Computing the Topology of Three
Dimensional Algebraic Curves
Distance Properties of ?
Points on Algebraic Curves
Distance Separation Measures Between Parametric Curves and Surfaces Toward Intersection and Collision Detection Applications
Elementary Theory of Del Pezzo Surfaces
The Geometry of the Tangent Developable
Numerical and Algebraic Properties of Bernstein Basis Resultant Matrices
Polynomial C2 Spline Surfaces Guided by Rational Multisided Patches
A Recursive Taylor Meth
ISBN:9783540271574
Series:e-books
Series:SpringerLink (Online service)
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Geometry, algebraic , Computer science Mathematics , Visualization , Numerical analysis , Global differential geometry
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2005-9780817644208:ONLINE Show nearby items on shelf
Title:Analytical Methods in Anisotropic Elasticity [electronic resource] : with Symbolic Computational Tools
Author(s): Omri Rand
Vladimir Rovenski
Date:2005
Publisher:Boston, MA : Birkhuser Boston
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:This comprehensive textbook/reference focuses on the mathematical techniques and solution methodologies required to establish the foundations of anisotropic elasticity and provides the theoretical background for composite materialanalysis. Specific a ttention is devoted to the potential of modern symbolic computational tools to support highly complex analytical solutions and their contribution to the rigor, analytical uniformity and exactness of the derivation.Key features: * Refreshes and modernizes classical mathematical methods encountered in the theory of anisotropic elasticity * Reviews basic and advanced steps of general analytical solutions, including the initial assumptions andselection of an adequate analytical course * Demonstrates the poten tial of symbolic computational tools to support the development of analytical solutions and to verify their exactness * Examines the physical interpretation of exactand approximate mathematical solutions and provides important insight into the involved ph enomena * Provides state-of-the-art solutions for a wide range of cases, including non-homogeneous and thin-walled configurations AnalyticalMethods in Anisotropic Elasticity will appeal to a broad audience involved in mathematical modeling, all of whom mu st have good mathematical skills: graduate students and professors in courses on elasticity and solid-mechanicslabs/seminars, applied mathematicians and numerical analysts, scientists and researchers. Engineers involved in aeronautical and space, maritime and mechanical design of composite material structures will find this an excellenthands-on reference text as well. All will benefit from the classical and advanced solutions that are derived and presented using symbolic computational techniques
Note:Springer eBooks
Contents:Preface
List of Figures
List of Tables
Fundamentals of Anisotropic Elasticity and Analytical Methodologies
Anisotropic Materials
Plane Deformation Analysis
Solution Methodologies
Foundations of Anisotropic Beam Analysis
Beams of General Anisotropy
Homogeneous, Uncoupled Monoclinic Beams
Non
Homogeneous Plane and Beam Analysis
Solid Coupled Monoclinic Beams
Thin
Walled Coupled Monoclinic Beams
Programs Description
References
Index
ISBN:9780817644208
Series:e-books
Series:SpringerLink (Online service)
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer aided design , Computer science Mathematics , Mathematical physics , Engineering mathematics , Materials
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2005-9780387228273:ONLINE Show nearby items on shelf
Title:Tutorials on Emerging Methodologies and Applications in Operations Research [electronic resource] : Presented at Informs 2004, Denver, CO
Author(s): H J G
Date:2005
Publisher:New York, NY : Springer New York
Size:1 online resource
Note:Springer e-book platform
Note:Springer 2013 e-book collections
Note:Operations Research emerged as a quantitative approach to problem-solving in World War II. Its founders, who were physicists, mathematicians, and engineers, quickly found peace-time uses for this new field. Moreover, we can saythat Operations Researc h (OR) was born in the same incubator as computer science, and through the years, it has spawned many new disciplines, including systems engineering, health care management, and transportation science.Fundamentally, Operations Research crosses discipline domains to seek solutions on a range of problems and benefits diverse disciplines from finance to bioengineering. Many disciplines routinely use OR methods. Many scientificresearchers, engineers, and others will find the methodological presentations in th is book useful and helpful in their problem-solving efforts. ORs strengths are modeling, analysis, and algorithm design. It provides a quantitativefoundation for a broad spectrum of problems, from economics to medicine, from environmental control to sport s, from e-commerce to computational geometry. The primary purpose of TUTORIALS ON EMERGING METHODOLOGIES AND APPLICATIONS INOPERATIONS RESEARCH is to provide a reference for practitioners and academics who seek a clear, concise presentation of developing methodologies, hence providing themselves with the capability to apply these methods to new problems.The field of Operations Research is always changing. Its changes are driven by the technology it uses and that it extends, and the applications that it af fects. Relevant changes in the field have a permanent effect on the conduct of ORand are vital to anyone who wants to be current in the field. Each chapter presents a new developing methodology in Operations Research. Each chapter examines each topic with clarity and depth, and organizes the examination around thefollowing questions: (1) What the developing methodology basically is about? (2) Why is it important? and (3) Where can I learn more?
Note:Springer eBooks
Contents:Heuristic Search for Network Design
Polyhedral Combinatorics
Radiation Oncology and Optimization
Parallel Algorithm Design for Branch and Bound
Computer
Aided Design for Electrical and Computer Engineering
Nonlinear Programming and Engineering Applications
Connecting MRP, MRP II and ERP
Supply Chain Production Planning via Optimization Models
ISBN:9780387228273
Series:e-books
Series:SpringerLink (Online service)
Series:International Series in Operations Research & Management Science, 0884-8289 : v76
Series:Mathematics and Statistics (Springer-11649)
Keywords: Mathematics , Computer science , Computational complexity , Computer aided design , Computer science Mathematics , Operations research
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2003-9783642557538:ONLINE Show nearby items on shelf
Title:Mathematics — Key Technology for the Future Joint Projects between Universities and Industry
Author(s):
Date:2003
Size:1 online resource (732 p.)
Note:10.1007/978-3-642-55753-8
Contents:I. Motors, Vehicles -- Synthesis of Automotive Cams Using Multiple Shooting-SQP Methods for Constrained Optimization -- Numerical Optimization of Scavenging in Two-Stroke Engines with Transfer Ducts, an Exhaust Port and a Moving
Piston -- A Numerical Tool for Flow Simulation in a Wankel Motor -- An Efficient Navier-Stokes Solver for Automotive Aerodynamics -- Numerical Simulation of Exhaust Systems in Car Industry — Efficient Calculation of Radiation Heat
Transfer -- Combinatorial Optimization Techniques for Three-Dimensional Arrangement Problems -- Simulation of Test-drives of Automobiles at Driving Limit -- An Optimal Control Approach To Real-Time Vehicle Guidance -- Theoretical and
Experimental Studies of an S-Catamaran -- II. Environmental Technology -- Robust Error Estimators for Interface Problems Occuring in Transport Processes in Porous Media -- Modelling and Simulation of a Planned Bio-Chemical in situ
Remediation -- Influence of Surfactants on Spreading of Contaminants and Soil Remediation -- Improvement of Environment Observing Remote Sensing Devices by Regularization Techniques -- III. Flow, Transport and Reactions in
Technological Processes -- Stability Analysis for Reactors from Chemical Industry -- Heterogeneous Dynamic Process Flowsheet Simulation of Chemical Plants -- Numerical Simulation of Annular Chromatography -- Numerical Methods for
Parameter Estimation in Bingham-Fluids -- A Viscoelastic Turbulence Model Based on Renormalization Group Theory -- Modelling and Simulation of Capacitor Impulse Welding -- Analysis of Transport Processes for Layered Porous Materials
Used in Industrial Applications -- Modelling and Numerical Simulation of District Heating Networks with Time-Saving Solution Methods -- Sensitivity and Robustness Analysis for Construction and Monitoring of Tubine-Generator Shafts --
IV. Optics and Sensors -- Adaptive Multigrid Methods for the Vectorial Maxwell Eigenvalue Problem for Optical Waveguide Design -- Direct and Inverse Problems for Diffractive Structures — Optimization of Binary Gratings -- Computation
of Electromagnetic Fields for a Humidity Sensor -- V. Crystal Growth, Semiconductors -- Simulation of Industrial Crystal Growth by the Vertical Bridgman Method -- Numerical Simulation and Control of Industrial Crystal Growth Processes
-- Optimal Control of Sublimation Growth of SiC Crystals -- Mathematical Modelling and Numerical Simulation of Semiconductor Detectors -- Optimal Design of High Power Electronic Devices by Topology Optimization -- Modelling and
Simulation of Strained Quantum Wells in Semiconductor Lasers -- VI. Electronic Circuits -- Efficient Analysis of Oscillatory Circuits -- Modelling and Simulation of Power Devices for High-Voltage Integrated Circuits -- Finding
Beneficial DAE Structures in Circuit Simulation -- CHORAL — a Charge-Oriented Algorithm for the Numerical Integration of Electrical Circuits -- VII. Tomography, Image Analysis and Visualisation -- Reconstructing Crystalline Structures
from Few Images Under High Resolution Transmission Electron Microscopy -- Measurement of Paint Layer Thickness with Photothermal Infrared Radiometry -- Spatio-Temporal Current Density Reconstruction from EEG-/MEG-Data -- Signal
Correction in NMR Spectroscopy -- On Scattering of Ultrasonic Waves -- Smoothing of Tomographic Data and Hybrid Volume-Surface Visualisation -- Video Coding with Adaptive Vector Quantization and Rate Distortion Optimization -- VIII.
Statistical Methods in Medical Applications -- The Application of Statistical Methods of Meta-Analysis for Heterogeneity Modelling in Medicine and Pharmacy, Psychology, Quality Control and Assurance -- An Application for the Analysis
of Human Tremor Time-Series -- IX. Optimization in Design and Production -- Free Material Optimization -- Automatic Layout and Labelling of State Diagrams -- Optimization Problems in a Semi-Automatic Device for Cutting Leather --
Stochastic Programming for Power Production and Trading Under Uncertainty -- Scheduling Scarce Resources in Chemical Engineering -- X. Optimization in Traffic and Communication -- Duty Scheduling in Public Transit -- Rotation Planning
for the Continental Service of a European Airline -- Computer Aided Scheduling of Switching Engines -- Train Schedule Optimization in Public Rail Transport -- An Integrated Planning Approach for Cellular Radio Networks -- Author Index
ISBN:9783642557538
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Keywords: Mathematics , Chemometrics , Computer graphics , Computer mathematics , Visualization , Statistics , Applied mathematics , Engineering mathematics , Mathematics , Computational Science and Engineering , Visualization , Appl.Mathematics/Computational Methods of Engineering , Math. Applications in Chemistry , Computer Imaging, Vision, Pattern Recognition and Graphics , Statistics for Life Sciences, Medicine, Health Sciences
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-2002-9780306470967:ONLINE Show nearby items on shelf
Title:Applied Nonlinear Analysis
Author(s):
Date:2002
Size:1 online resource (548 p.)
Note:10.1007/b114992
Contents:On the Regularity and Decay of the Weak Solutions to the Steady-State Navier-Stokes Equations in Exterior Domains -- A Note on Turbulence Modeling -- L2,?-Regularity for Nonlinear Elliptic Systems of Second Order -- On the Fredholm
Alternative for Nonlinear Homogeneous Operators -- Existence of Solutions to a Nonlinear Coupled Thermo-Viscoelastic Contact Problem with Small Coulomb Friction -- On Some Global Existence Theorems for a Semilinear Parabolic Problem --
Bifurcation of Solutions to Reaction-Diffusion Systems with Jumping Nonlinearities -- Coupled Problems for Viscous Incompressible Flow in Exterior Domains -- Remarks on the Determinant in Nonlinear Elasticity and Fracture Mechanics --
On Modelling of Czochralski Flow, the Case of Non Plane Free Surface -- Symmetric Stationary Solutions to the Plane Exterior Navier-Stokes Problem for Arbitrary Large Reynolds Number -- A Fictitious-Domain Method with Distributed
Multiplier for the Stokes Problem -- Reliable Solution of a Unilateral Contact Problem with Friction, Considering Uncertain Input Data -- Domain Decomposition Algorithm for Computer Aided Design -- Solution of Convection-Diffusion
Problems with the Memory Terms -- On Global Existence of Smooth Two-Dimensional Steady Flows for a Class of Non-Newtonian Fluids under Various Boundary Conditions -- Viscosity Solutions for Degenerate and Nonmonotone Elliptic Equations
-- Remarks on Compactness in the Formation of Fine Structures -- Finite Element Analysis of a Nonlinear Elliptic Problem with a Pure Radiation Condition -- Estimates of Three-Dimensional Oseen Kernels in Weighted LP Spaces -- Hardy’s
Inequality and Spectral Problems of Nonlinear Operators -- Remarks on the Regularity of Solutions of Elliptic Systems -- Singular Perturbations in Optimal Control Problem -- Optimization of Steady Flows for Incompressible Viscous
Fluids -- Asymptotic Behaviour of Compressible Maxwell Fluids in Exterior Domains -- Regularity of a Suitable Weak Solution to the Navier-Stokes Equations as a Consequence of Regularity of One Velocity Component -- On a Class of High
Resolution Methods for Solving Hyperbolic Conservation Laws with Source Terms -- On the Decay to Zero of the L2-Norms of Perturbations to a Viscous Compressible Fluid Motion Exterior to a Compact Obstacle -- Global Behavior of
Compressible Fluid with a Free Boundary and Large Data -- A Geometric Approach to Dynamical Systems in ?N -- On a Three-Dimensional Convective Stefan Problem for a Non-Newtonian Fluid -- Replacing H by H2 -- Flow of Shear Dependent
Electrorheological Fluids: Unsteady Space Periodic Case -- On Decay of Solustions to the Navier-Stokes Equations -- Convexity Conditions for Rotationally Invariant Functions in Two Dimensions -- Hölder Continuity of Weak Solutions to
Certain Nonlinear Parabolic Systems in Two Space Dimensions
ISBN:9780306470967
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Keywords: Mathematics , Numerical analysis , Mathematical analysis , Analysis (Mathematics) , Functional analysis , Partial differential equations , Mechanics , Mathematics , Analysis , Partial Differential Equations , Functional Analysis , Mechanics , Numeric Computing
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1999-9789401153386:ONLINE Show nearby items on shelf
Title:Handbook of Splines
Author(s): Gheorghe Micula
Date:1999
Size:1 online resource (606 p.)
Note:10.1007/978-94-011-5338-6
Contents:1 Spline Functions and the Representation of Linear Functionals -- 2 Multivariate Spline Functions -- 3 Nonlinear Sets of Spline Functions -- 4 Numerical Treatment of the Integral E-Quations -- 5 Numerical Solution of Ordinary
Differential Equations -- 6 Splines and Finite Elements -- 7 Finite Element Method for Solution of Boundary Problems for Partial Differential Equations -- 8 Spline Functions in Computer Aided Geometric Design -- 9 From Spline to
Fractals -- 10 Box Splines -- 11 Spline Wavelets -- 12 References
ISBN:9789401153386
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Mathematics and Its Applications : 462
Keywords: Mathematics , Mathematics , Mathematics, general
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1995-9783642577628:ONLINE Show nearby items on shelf
Title:Computer-Aided Transit Scheduling Proceedings of the Sixth International Workshop on Computer-Aided Scheduling of Public Transport
Author(s):
Date:1995
Size:1 online resource (374 p.)
Note:10.1007/978-3-642-57762-8
Contents:Part: Network Planning -- Line Network Planning -- On Fair Zone Designs in Public Transportation -- Transfer Optimization in Public Transport -- Practical Experiences in Schedule Synchronization -- Transit Route Design Using
Scheduling and Multiobjective Programming Techniques -- Part: Vehicle Scheduling -- Vehicle Scheduling for Public Mass Transit — An Overview -- Bus Scheduling with Trip Coordination and Complex Constraints -- Minimum Cost Vehicle
Scheduling with Different Types of Transit Vehicles -- Vehicle Scheduling Problem with Multiple Type of Vehicles and a Single Depot -- Vehicle Scheduling with Time Constraint -- An Exact Algorithm for Combining Vehicle Trips -- Part:
Crew Scheduling -- Bus Driver Scheduling — An Overview -- Network Models, Lagrangean Relaxation and Subgradients Bundle Approach in Crew Scheduling Problems -- Greedy Genetic Algorithms, Optimizing Mutations and Bus Driver Scheduling
-- Enriching Rules in a Driver Duty Estimator -- Part: Workforce Planning -- Public Transport Workforce Sizing Recognizing the Service Reliability Objective -- A New Approach for the Crew Rostering Problem -- Part: Monitoring and
Operational Control -- Real-Time Computer Aided Adaptive Control in Public Transport from the Point of View of Schedule Reliability -- Real-Time Dispatching of Public Transit Operations with and without Bus Location Information --
Part: The Use of Computer-Aided Systems and Practical Experiences -- Integrated Data Processing for Public Transport in Hamburg -- Train Scheduling — Migration of Manual Methods to Scalable Computer Platforms -- Recent Developments of
HOT II -- Results Obtained with Crew-Opt: A Column Generation Method for Transit Crew Scheduling -- Modelling the Scheduling of Train Drivers -- Appendix 1 -- Appendix 2
ISBN:9783642577628
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Lecture Notes in Economics and Mathematical Systems: 430
Keywords: Mathematics , Operations research , Decision making , Applied mathematics , Engineering mathematics , Automotive engineering , Economic policy , Mathematics , Applications of Mathematics , Operation Research/Decision Theory , R & D/Technology Policy , Automotive Engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1994-9783709193464:ONLINE Show nearby items on shelf
Title:Robotics in Alpe-Adria Region Proceedings of the 2nd International Workshop (RAA ’93), June 1993, Krems, Austria
Author(s):
Date:1994
Size:1 online resource (230 p.)
Note:10.1007/978-3-7091-9346-4
Contents:Surveys -- Robotics Research in Austria -- Considerations on Objectives, Tasks and Organisation of Alpe-Adria Centre for Robotics and Automation -- Advanced Control Concepts for Industrial Robots -- IMProvement in Automation and
Control Technology — A Joint European Initiative -- Robotics Research in Alpe Adria -- Research Activities in Robotics at RISC — Linz -- Applied Robotics Group Research Activities at the ITIA — Institute for Industrial Technologies and
Automation of CNR -- Robotic Research at the Scientific Academy of Lower Austria -- Robot Kinematics and Kinetics -- Robot Wrist Configurations, Mechanisms and Kinematics -- Parallel Evaluation of Robot Kinematic Transformations --
Robot Arm Modelling and Control -- Dynamic Model of a Mobile Robot for Analyzing End-effector Deviations Caused from Ground Unevenness -- Construction, Design and Simulation of Robots -- Considerations for the Construction of
Lightweight Robots -- Design and Construction of a Modular Robot with Eulerian Joints -- Design of SCARA Robot -- Design and Measures for Lightweight Industrial Robots -- Designing Manipulators for a Robotized Manufacturing -- Optimal
Stochastic Design of a Parallel Robot for Tolerance -- USIS — an Advanced 3D-Robot Simulation System -- Emulation of Articulated Robots -- ALMORO — Symbolic Robot Dynamics Customizer -- Techniques to Improve the Performance of an
Industrial SCARA Robot -- Robot Control -- Experimental Multiprocessor Robot Controller -- Implementation of a Low Cost Robot Controller PC-ROBOCONT on Hydraulic Robot for Spray Painting G-201 -- Robust Adaptive Lyapunov — based Robot
Control -- Stability of Hybrid Position/Force Control Scheme during Free Motion -- Sensors and Mobile Robots -- Recognition of Three-dimensional Objects Using Two-dimensional Subspaces Gained by Intersections -- Multi-sensor Technique
for Increasing Intelligence of Assembly Robots -- Design of a Planetary Leg Mechanism Using Chebyshev’s Optimization Method -- A New Hybrid Locomotion Mobile Robot for Semi-structured Environments -- Commanding a Robot by Voice: Speech
and Autonomous Navigation for the Mobile Robot of MAIA -- Applications -- Robot Welding of Tubes -- CAD for Robot Workcells in Battery Manufacturing -- An Automatic Control on Band Saw Tool Vibrations in the Primar Cutting Process --
Low Cost CAD/CAM-coupling Applications of Artificial Intelligence to Robotic Assembly -- Robots in Manufacturing Cells -- Scheduling in Flexible Manufacturing Systems, Supported through Cyclic Net Analysis -- Computer Aided Planning of
Robotized Assembly Systems -- A User-friendly Software Tool for the Semiautomatic Design of Small Assembly Cells -- Data Structures and Procedures for Computer Representation of Robot Cells -- Robots in Testing -- Robot Guided
Anthropoidic Measuring Device -- Circular Test: a New Method for Testing Industrial Robots -- A Low Cost Robot System for Stylus and Workpiece Manipulation in Computer Aided Quality Control -- Low Cost Automated Measuring System for
Circularity Measurements -- Rationalization of the CAD Data Management in Quality Assurance Systems -- Various Aspects -- Modular Parallel Gripper System -- Robotics in Transportation
ISBN:9783709193464
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Keywords: Physics , Computer-aided engineering , Mechanics , Engineering design , Control engineering , Robotics , Mechatronics , Physics , Mechanics , Engineering Design , Control, Robotics, Mechatronics , Computer-Aided Engineering (CAD, CAE) and Design
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1994-9783642785023:ONLINE Show nearby items on shelf
Title:Duration and Change Fifty Years at Oberwolfach
Author(s):
Date:1994
Size:1 online resource (41 p.)
Note:10.1007/978-3-642-78502-3
Contents:Addresses -- Minister für Wissenschaft und Forschung des Landes Baden-Württemberg -- Generalsekretär der Volkswagen-Stiftung -- American Mathematical Society -- Dansk Matematisk Forening -- Deutsche Mathematiker-Vereinigung --
European Mathematical Society -- Gesellschaft für Angewandte Mathematik und Mechanik -- Österreichische Mathematische Gesellschaft -- Russian Academy of Sciences -- Schweizerische Mathematische Gesellschaft Société Mathématique Suisse
-- Société Mathematique de France -- Wiskundig Genootschap -- History -- Antrag auf Bewilligung von Mitteln zur Errichtung eines Gästehauses vom 4. März 1963 -- Erinnerungen -- Abschied vom Schloß in Oberwolfach -- Allocution du
professeur Henri Cartan (Paris) -- Einweihung der baulichen Erweiterungen am 26. Mai 1989 — Ansprache -- Die Arbeitsgemeinschaft Oberwolfach -- Dei Oberwolfachpreis und seine Preisträger -- The Work of Peter B. Kronheimer -- Zur
Verleihung des Preises an Jörg Brüdem -- Laudatio auf Jens Franke -- Essays -- Some Trends in Riemannian Geometry -- Mathematical Aspects of Computer Aided Geometric Design -- On the Place of Mathematics in Culture -- Mathematical
Shell Theory: Recent Developments and Open Problems -- On Algebras, Wild and Tame -- Number Theory and Cryptography -- „Ist 4 denn noch normal?” -- Some Remarks on Geometric Mechanics -- Neuere Entwicklungen in der Komplexen Geometrie
ISBN:9783642785023
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Keywords: Mathematics , Mathematics , Mathematics, general
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1993-9783034885539:ONLINE Show nearby items on shelf
Title:Software Systems for Structural Optimization
Author(s):
Date:1993
Size:1 online resource (285 p.)
Note:10.1007/978-3-0348-8553-9
Contents:Structural optimization — a survey -- Mathematical optimization: an introduction -- Design optimization with the finite element program ANSYSR -- B&B: a FE-program for cost minimization in concrete design -- The CAOS system -- Shape
optimization with program CARAT -- DYNOPT: a program system for structural optimization weight minimum design with respect to various constraints -- MBB-Lagrange: a computer aided structural design system -- The OASIS-ALADDIN
structural optimization system -- The structural optimization system OPTSYS -- SAPOP: an optimization procedure for multicriteria structural design -- SHAPE: a structural shape optimization program -- STARS: mathematical foundations
ISBN:9783034885539
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:International Series of Numerical Mathematics : 110
Keywords: Science , Science , Science, general
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1992-9789401125567:ONLINE Show nearby items on shelf
Title:Three-Dimensional Modeling with Geoscientific Information Systems
Author(s):
Date:1992
Size:1 online resource (443 p.)
Note:10.1007/978-94-011-2556-7
Contents:A: Preface and Achievements of the Workshop -- 1. Preface -- 2. Achievements of the Workshop -- B: Definition of the Problem -- 3. Spatial data handling in the geosciences -- 4. 3-D modelling with geoscientific information systems:
The problem -- 5. Geologic data handling -- 6. The role of the conceptual datamodel in software application integration -- C: Existing Three-Dimensional Geoscientific Information Systems -- 7. A spatial information system with advanced
modeling capabilities -- 8. The DASDBS geokernal - an extensible database system for GIS -- 9. Three-dimensional solid modeling of geo-objects using non-uniform rational B-splines (NURBS) -- 10. A mapping approach to three-dimensional
modeling -- 11. GOCAD: a computer aided design program for geological applications -- D: Three-Dimensional Data Structures and Display Methods -- 12. Modeling natural objects via octrees -- 13. 3-D structures for the encoding of
geometry and internal properties -- 14. Methods for the efficient storage of spatial geologic data -- 15. Key 3D modelling concepts for geoscientific analysis -- 16. Geometry for three-dimensional GIS in geoscientific applications --
17. GIDBS: a database system for hierarchically represented gray-scale images -- E: Applications of Three-Dimensional Geoscientific Modeling -- 18. Applications of 3-D geoscientific modeling for hydrocarbon exploration -- 19. Two major
problems in representing geological well data and seismic data in petroleum-bearing regions via 3-D geographic information systems -- 20. The application of new 3-D computer modelling techniques to mining -- 21. Applications of
three-dimensional geoscientific mapping and modeling systems to hydrogeological studies -- F: Transcriptions of Conference Committee Discussions -- 22. Report of discussions by the computer scientists -- 23. Report of discussions by
the geoscientists -- 24. Report of discussions by the members of national geological surveys -- 25. Report of discussions by the hydrocarbon interest group -- 26. Report of discussions by the minerals exploration interest group -- 27.
Report of discussions by the environmental sciences interest group -- 28. Report of closing discussions -- Glossary of Terms -- Survey of Participants -- List of Participants
ISBN:9789401125567
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:NATO ASI Series, Series C: Mathematical and Physical Sciences: 354
Keywords: Earth sciences , Geology , Geophysics , System theory , Earth Sciences , Quantitative Geology , Geophysics/Geodesy , Systems Theory, Control
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1992-9783642844508:ONLINE Show nearby items on shelf
Title:Design and Operation of Heat Exchangers Proceedings of the EUROTHERM Seminar No. 18, February 27 – March 1 1991, Hamburg, Germany
Author(s):
Date:1992
Size:1 online resource (236 p.)
Note:10.1007/978-3-642-84450-8
Contents:General Problems -- Selected problems in heat exchanger design -- Compact new formulae for mean temperature difference and efficiency of heat exchangers -- The multi-dimensional thermalhydraulics code TRIO applications to heat
exchangers -- Heat exchanger control by stream(s) by-pass -- Shell and Tube Heat Exchangers -- Effects of unequal transfer area in multi-pass heat exchangers -- Variable pitch tube layout concept for shell and tube heat exchanger --
Design improvements of a shell and tube heat exchanger based on practical experience and numerical analysis -- Simple algorithms for optimization of shell and tube heat exchangers -- Dispersion model for divided-flow heat exchanger --
Heat exchanger in transient conditions -- Cross-Flow Heat Exchangers -- Approximate equations for the design of cross-flow heat exchangers -- Numerical analysis of cross-flow heat exchangers in order to establish a new design method --
Improvement of fin-tube heat exchangers by longitudinal vortex generators -- Numerical studies of a compact fin-tube heat exchanger -- Heat transfer and pressure drop in single rows -- Pressure losses in tube bundles of close spacings
-- Improvement of existing fuel-air heat exchangers of modern air-breathing engines -- A model for predicting the performance of domestic gas-fired water heaters -- Plastic heat exchangers -- Condition monitoring of air cooled heat
exchangers -- Plate Heat Exchangers -- Approximate theory of spiral heat exchanger -- Thermal hydraulic performances of plate and frame heat exchangers — The CEPAJ software -- Flow distribution in plate heat exchangers and consequences
on thermal and hydraulic performances -- Welded plate heat exchangers as refrigerants dry-ex evaporators -- Development of a compact heat exchanger for gas turbine heat recovery -- High performance titanium plate fin heat exchanger
using a novel manufacturing process -- Regenerators -- Optimal thermal control of regenerative heat exchangers -- A simplified model for a helical heat exchanger for long-term energy storage in soil -- Multiphase Systems -- Pressure
drop during condensation in vertical tubes -- Intensification of heat transfer in horizontal-tube vapour condensers -- Measurements and modelling: a 350 MWe power plant condenser -- The computer aided design of steam surface condensers
-- Some comments on the use of mixed bundles of smooth and enhanced tubes in reboilers -- The heat pipe heat exchangers: design, technology and applications -- Performance analysis and test of a two-phase closed thermosyphon heat
exchanger -- An application of semi-empirical turbulence theory to the hydrodynamics and heat exchange in gas-liquid foam -- Prediction of heat transfer rates in a liquid-liquid direct-contact heat exchanger
ISBN:9783642844508
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:EUROTHERM Seminars : 18
Keywords: Physics , Chemical engineering , Thermodynamics , Physics , Thermodynamics , Industrial Chemistry/Chemical Engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1992-9783642775376:ONLINE Show nearby items on shelf
Title:New Directions for Operations Research in Manufacturing Proceedings of a Joint US/German Conference, Gaithersburg, Maryland, USA, July 30–31, 1991
Author(s):
Date:1992
Size:1 online resource (530 p.)
Note:10.1007/978-3-642-77537-6
Contents:I. Plenary Address -- Whither Manufacturing and Operations Research? -- II. Planning and Control -- An Hierarchical Planning, Loading, Routing and Control Scheme for Flexible Manufacturing Systems -- Analysis of Production Planning
and Control (PPC) Systems as an Efficient Combination of Information Activities -- Hierarchical Production Planning in Group Technologies -- Design of an Information-Based Distributed Production Planning System -- LP-Models in
Production Planning and Control -- A Realization for a Generic Controller in Production Planning Hierarchies -- III. Genetic Algorithms -- Sequence Scheduling with Genetic Algorithms -- Local Search in Problem and Heuristic Space for
Job Shop Scheduling Genetic Algorithms -- The Application of a Parallel Genetic Algorithm to the n/m/P/Cmax Flowshop Problem -- IV. Scheduling -- Scheduling Semiconductor Test Operations: Optimization and Approximation -- Job and Tool
Scheduling for Flexible Machining Cells -- Scheduling and Control of Flexible Manufacturing Systems: Some Experiences and Observations -- Dispatching Issues in Job Shop Scheduling -- V. Real-Time Scheduling -- Dynamic Task Assignment
in Distributed Manufacturing Systems -- An Object-Oriented Knowledge Representation in Real-Time Scheduling -- An Expert System for Distributed Real-Time Scheduling of Factory Communications Resources -- A Rescheduling Procedure for
Manufacturing Systems Under Random Disruptions -- VI. Neural Networks -- A Hybrid Approach to Flexible Manufacturing Systems Scheduling Using Neural and Symbolic Processing -- Applying Artificial Neural Networks to Process Planning --
A Hybrid Intelligent Architecture for Automated PCB Assembly -- Neural Networks for Detection of Process Change in Manufacturing Systems -- VII. Applications of Mathematical Programming -- Tabu Search Techniques for the Quadratic
Semi-Assignment Problem -- The Impact of Correlated Demands on Integrated Safety Stock Optimization in Multi-stage Manufacturing Systems -- VIII. Applications of Modelling -- An Integrated System Shell Concept for Computer Aided Design
and Planning -- Service Level in Multistage MRP and Base Stock Controlled Production Systems -- Rapid Modeling: Methods and Tools for Strategic and Operational Planning of Manufacturing Systems -- Enterprise Models for the Design and
Management of Manufacturing Systems -- Responsive Tool Management: Making Fixed Manufacturing Systems More Flexible -- Multicriteria Design of Manufacturing Systems -- List of Sponsors
ISBN:9783642775376
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Keywords: Mathematics , Organization , Planning , Production management , Operations research , Decision making , Management science , Mathematics , Operations Research, Management Science , Operation Research/Decision Theory , Operations Management , Organization
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1991-9789400907034:ONLINE Show nearby items on shelf
Title:Proceedings of the Fourth European Conference on Mathematics in Industry
Author(s):
Date:1991
Size:1 online resource (448 p.)
Note:10.1007/978-94-009-0703-4
Contents:Invited Lectures -- On a Mathematical Model for the Crystallization of Polymers -- Remarks on New Mathematical Problems Arising in the Context of Information Technology -- Time Division Multiple Access Systems and Matrix Decomposition
-- Fresh Breeze around the Ivory Tower — Current Trends in Austrian Higher Education -- Determination of the Transient Thermal Behaviour of Thyristors with Cooling Devices (abstract) -- Mathematics for Industry -- Mathematical Problems
in Research at HILTI -- Minisymposium: Steel Processing -- Water Droplet Cooling of Galvanised Iron -- A Mathematical Model for the Calculation of Cooling Criteria for Round Bloom -- Automatic Secondary Cooling Control for the
Continuous Casting Process of Steel -- Some Problems of Identification and Control Arising from Cooling Rolled Wires -- Minisymposium: Chemical Engineering -- Numerical Simulation of Emulsion Liquid Membrane Permeation -- The Lay-out
of Reactive Extractors -- The Simulation of a Co-Current Bubble Reactor -- A Numerical Model for Calculation of a Counter Current Heat Exchanger -- Contributed Lectures -- Modelling Oxygen Supply in Spheroids of Tumor Cells -- On a
Numerical Method for Variable Heat Flow through External Walls -- Optimization of a Solar Domestic Hot-Water System -- The Fluttering of Fibres in Airspinning Processes -- A Numerical Model for Electromagnetic Casters -- On Consistent
Initialization of Differential-Algebraic Equations with Discontinuities -- On the Generation of Optical Solitons -- Mathematical Models for the Diffusion of Innovations -- Image Segmentation by Minimum Information Loss (abstract) -- A
Brief Mathematical Analysis of Electrochemical Machining Problems -- A Mathematical Model for the Production of Bimetallic Strip -- Computing Guaranteed Error Bounds for Problems in Renewal Theory -- Threshold Accepting Algorithms for
0–1 Knapsack Problems -- Digital Topology in Document Processing -- Modelling the Rheology of a Coal-Water Slurry -- Nonorthogonal Expansions of Signals and Some of their Applications (abstract) -- Two-Phase Flow Methodology and
Modelling -- Maximum Expected Information (MEI) Discretization Method for Spatial Data Analysis (abstract) -- Automatic Mesh Generation for 3D Domains with Application in Fluid Mechanics, Structures, Electrotechnics and Aerospace
Problems -- Quality Control of Artificial Fabrics (abstract) -- Developing a Unidimensional Simulation Model for Producing Silicon in an Electric Furnace -- Numerical Study of the Nonlinear Barotropic Instability of Rossby Wave Motion
-- The Method of Region Analysis and its Application for Optimal Control Problems of Hydroelectric Power Plants -- Stochastic Modelling of the Dielectric Relaxation in Condensed Matter (abstract) -- A Calculation and Contour Plotting
System for Flame Temperatures -- On the Taper Curves in the Forest Industry -- Analytical Three-Dimensional Stress Distribution in the Healthy Hip Joint -- Torsional Vibrations in a Crank Shaft -- An Adaptive Finite Element Method for
Stefan Problems -- The Theoretical Ecology of Coccidia with Reference to Poultry Production -- A Dynamic Two-Phase Flow Model for a Purification Plant -- Exchange of Parametric Curve and Surface Geometry between Computer Aided Design
Systems -- Fairing of Ship Lines with Mechanical Splines -- Numerical Simulation of the Stretching Behavior of Polymeric Liquids by Nonlinear Volterra Integrodifferential Equations with Boundary Conditions -- 3-D-Fitting of Blades and
Vanes -- Development of a Method for Electrical Load Forecasting and its Implementation Using Expert System Techniques -- Fibre Drying -- Optimal Extension of a System of Hydro Energy Storage Plants -- Modelling Separated Flows -- On
the Impact of Rigid Bodies with Small Deadrise Angle onto Inviscid, Incompressible Fluid -- B-Spline Library for Mathematical Modelling and Solving of Scientific and Industrial Problems
ISBN:9789400907034
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:European Consortium for Mathematics in Industry : 6
Keywords: Mathematics , Chemical engineering , System theory , Mathematical models , Applied mathematics , Engineering mathematics , Mechanical engineering , Mathematics , Mathematical Modeling and Industrial Mathematics , Systems Theory, Control , Appl.Mathematics/Computational Methods of Engineering , Mechanical Engineering , Industrial Chemistry/Chemical Engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1989-9783642835810:ONLINE Show nearby items on shelf
Title:Dynamics of Controlled Mechanical Systems IUTAM/IFAC Symposium, Zurich, Switzerland, May 30–June 3, 1988
Author(s):
Date:1989
Size:1 online resource (377 p.)
Note:10.1007/978-3-642-83581-0
Contents:Modeling -- Model Verification by Experiments with Finite Effect Sequences.(FES) -- Modeling the Dynamics of a Complete Vehicle with Nonlinear Wheel Suspension Kinematics and Elastic Hinges -- Computer Aided Formulation of Equations
of Motion -- State Equations of Motion for Flexible Bodies in Terms of Quasi-Coordinates -- Design Tools -- Simulation, Test and Diagnostics Integrated for a Safety Design of Magnetic Bearing Prototypes -- Hardware - Software
Interfaces for Dynamical Simulations -- Graphical Tools -- Towards Graphical Programming in Control of Mechanical Systems -- Graphical Verification of Complex Multibody Motion in Space Applications -- Examples for the Dynamics of
Controlled Mechanical Systems -- Active Vibration Control of a Cantilever Beam by a Piezoelectric Ceramic Actuator -- Fiber Connected Tug of War -- Structure of Magnetic Bearing Control System for Compensating Unbalance Force --
Sensors and Actuators -- Placing Dynamic Sensors and Actuators on Flexible Space Structures -- Aerospace -- A Simple Active Controller to Supress Helicopter Air Resonance in Hover and Forward Flight -- Active Vibration Control for
Flexible Space Environment Use Manipulators -- Orientation of Large Orbital Stations -- Attitude Stability of a Flexible Asymmetric Dual Spin Spacecraft -- Robotics -- Robot Control in Cartesian Space with Adaptive Nonlinear Dynamics
Compensation -- Modeling and Control of Elastic Robot Arm with Prismatic Joint -- A Decentralized and Robust Controller for Robots -- Isotropic and Uniform Inertial and Acceleration Characteristics: Issues in the Design of Redundant
Manipulators -- Effect of Sampling Rates on the Performance of Model-Based Control Schemes -- Modeling and Control of a Flexible Robot Link -- Decomposed Parameter Identification Approach of Robot Dynamics -- Dynamic Behavior of a
Flexible Robotic Manipulator -- Vehicles -- Control of an Active Suspension System for a Wheeled Vehicle -- Dynamic Modeling of High Speed Ground Transportation Vehicles for Control Design and Performance Evaluation -- Trajectory
Planning and Motion Control of Mobile Robots -- Researches of the Biped Robot in Japan
ISBN:9783642835810
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Keywords: Physics , Mechanics , Engineering design , Automotive engineering , Control engineering , Robotics , Mechatronics , Physics , Mechanics , Engineering Design , Control, Robotics, Mechatronics , Automotive Engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1987-9781461309154:ONLINE Show nearby items on shelf
Title:Computer-Based Instruction in Military Environments
Author(s):
Date:1987
Size:1 online resource (346 p.)
Note:10.1007/978-1-4613-0915-4
Contents:An Overview of Computer-Based Instruction in Military Environments -- Intelligent CAI -- An Intelligent Computer Assisted Instruction System for Maintenance Training -- The Conversion of an Expert System to an Intelligent CAI System
-- Self-Organised Learning within an Intelligent Teaching System -- Portable, Intelligent Simulation for ASW Training -- Development of Prototypes -- CAITER: A Computer-Based Instruction Terminal -- The Use of Computers in Training in
the British Army -- Weapon Training and Simulation -- CBI in the Royal Air Force: A Case Study of Two Part-Task Trainers -- Development of a Prototype Computer-Based Testing and Assessment System -- Implementation and Evaluation --
Implementation of Computer-Based Training: A System Evaluation and Lessons Learned -- Evaluating New Technology: Formative Evaluation of Intelligent Computer-Assisted Instruction -- AIDS to Resource Usage, Resource Sharing and
Authoring -- Online Help: Design Issues for Authoring Systems -- A User-Maintained Database for Trainers in Military Environments -- Computer-Based Instruction in the Department of Defense: Enhancing Application of the Technology --
Turning Educators into Authors: A Case Study in the Acquisition of Authoring Skills -- Research in Traditional and Non-Traditional Environments -- New Frontiers for Computer Aided Training -- The Development and Test of a Hand-Held
Computerized Training Aid -- Consideration of Instruction and Training in Human Operator Models -- Computer-Assisted Programmed Cases: A Learning Method for Improving the Understanding of Persons -- Electronic Delivery of Job
Performance Aids -- New Theory -- Video-Game Technology and Training Research -- Experience-Consolidation Systems: A Sketch of a Theory of Computer-Based Instruction in Ill-Structured Domains -- The Use of Intelligent Authoring Tools
to Enhance CBI in Technical Training -- Invited Addresses -- Cognitive Science, Artificial Intelligence and Complex Training -- Authoring Tools: Past, Present, and Future
ISBN:9781461309154
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Keywords: Computer science , Health informatics , Computers and civilization , Computer Science , Computers and Society , Health Informatics
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1984-9783642524653:ONLINE Show nearby items on shelf
Title:Computer Aided Analysis and Optimization of Mechanical System Dynamics
Author(s):
Date:1984
Size:1 online resource (700 p.)
Note:10.1007/978-3-642-52465-3
Contents:Elements and Methods of Computational Dynamics -- 1 Analytical Methods -- Computer Oriented Analytical Dynamics of Machinery -- Analytical Methods in Mechanical System Dynamics -- Dual Quaternions in the Kinematics of Spatial
Mechanisms -- Quaternions and Euler Parameters — A Brief Exposition -- 2 Computer Aided Formulation of Equations of Dynamics -- Computer Generation of Equations of Motion -- Vehicle Dynamics Applications -- Methods and Experience in
Computer Aided Design of Large-Displacement Mechanical Systems -- Spatial Kinematic and Dynamic Analysis with Euler Parameters -- Application of Symbolic Computation to the Analysis of Mechanical Systems, Including Robot Arms -- 3
Numerical Methods in Dynamics -- Numerical Methods for Systems of Initial Value Problems — The State of the Art -- Differential-Algebraic Equations -- The Numerical Solution of Problems Which May Have High Frequency Components -- Some
Methods for Dynamic Analysis of Constrained Mechanical Systems: A Survey -- Application of Animated Graphics in Large Scale Mechanical System Dynamics -- 4 Interdisciplinary Problems -- Dynamics of Flexible Mechanisms -- Controlled
Dynamic Systems Modeling -- Numerical Integration of Systems with Unilateral Constraints -- 5 Synthesis and Optimizaton -- Synthesis of Mechanisms -- Design Sensitivity Analysis and Optimization of Kinematically Driven Systems --
Design Sensitivity Analysis and Optimization of Dynamically Driven Systems -- Optimization Methods -- Sequential Quadratic Programming Methods for Nonlinear Programming
ISBN:9783642524653
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:NATO ASI Series, Series F: Computer and Systems Sciences : 9
Keywords: Mathematics , Computer-aided engineering , Numerical analysis , Mathematics , Numerical Analysis , Computer-Aided Engineering (CAD, CAE) and Design
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1984-9783540391302:ONLINE Show nearby items on shelf
Title:Computing in Accelerator Design and Operation Proceedings of the Europhysics Conference Held at the Hahn-Meitner-Institut für Kernforschung Berlin GmbH Berlin, Germany, September 20–23,1983
Author(s):
Date:1984
Size:1 online resource (578 p.)
Note:10.1007/3-540-13909-5
Contents:Future high energy accelerators -- Beam optics and dynamics -- Design of r.f. cavities -- Computer aided magnet design -- Beam instabilities and computer simulations -- Calculation of polarization effects -- Particle tracking in
accelerators with higher order multipole fields -- Programs for designing the accelerating cavities for linear accelerators -- The MAGMI program for double pass electron linear accelerators -- A fortran program (RELAX3D) to solve the 3
dimensional poisson (Laplace) equation -- Calculation of three dimensional electric fields by successive over-relaxation in the central region of a cyclotron -- The design of the accelerating cavity for SuSe with the aid of the
three-dimensional cavity calculation program CAV3D -- The further development of the calculation of the three dimensional electric field in the central region of the INR cyclotron -- Particle tracking using lie algebraic methods --
Numerical investigation of bunch-merging in a heavy-ion-synchrotron -- Nonlinear aspects of Landau damping in computer simulation of the microwave instability -- The transport theory of particle beam-congregation in six-dimensional
phase space -- The MAD program -- Analogue computer display of accelerator beam optics -- A Monte Carlo beam transport program, REVMOC -- Multiparticle codes developed at GANIL -- MIRKO — an interactive program for beam lines and
synchrotrons -- Aperture studies of the BNL colliding beam accelerator with reduced superperiodicity -- The study of misalignmental characteristics of beam optical components of HI-13 tandem -- Calculations for the design and
modification of the 2 cyclotrons of S.A.R.A. -- Magnetic field optimization and beam dynamics calculations for SuSe -- ‘DFLKTR’ the code for designing the electrostatic extraction system for cyclotrons -- RFQ design considerations --
Effects of higher order multipole fields on high current RFQ accelerator design -- Versatile codes and effective method for orbit programming with actually existing first harmonics in cyclotron -- Calculations of the heavy ion saclay
tandem post accelerator beams -- Electron injector computer simulations -- Numerical simulations of orbit correction in large electron rings -- Simulation of polarization correction schemes in e+e? storage rings -- Computation of
electron spin polarisation in storage rings -- Archsim: A proton synchrotron tracking program including longitudinal space charge -- A method for distinguishing chaotic from quasi-periodic motions in orbit tracking programs -- PATH — a
lumped-element beam-transport simulation program with space charge -- Workshop no. 1. Computer programs for lattice calculations -- Digital control of accelerators — the first ten years -- Distributed digital control of accelerators --
Centralized digital control of accelerators -- Concurrent control of interacting accelerators with particle beams of varying format and kind -- Integrated control and data acquisition of experimental facilities -- Software engineering
tools -- Centralization and decentralization in the TRIUMF Control System -- The Fermilab Accelerator Controls System -- The control system for the daresbury synchrotron radiation source -- The microprocessor-based control system for
the Milan superconducting cyclotron -- The ELSA control system hardware -- Computer control system of polarized ion source and beam transport line at KEK -- Computer control system of TRISTAN -- The system for process control and data
analysis based on microcomputer and CAMAC equipment in the LAE 13/9 linear electron accelerator -- Some features of the computer control system for the Spallation Neutron Source (SNS) of the Rutherford Appleton Laboratory -- Design
criteria for the operation of accelerators under computer control -- Computer aided control of the bonn penning polarized ion source -- Treatment and display of transient signals in the CERN antiproton accumulator -- Fast CAMAC-based
sampling digitizers and digital filters for beam diagnostics and control in the CERN PS complex -- Automated cyclotron magnetic field measurement at the University of Manitoba -- On the problem of magnet ramping -- High level control
programs at NSLS -- The minicomputer network for control of the dedicated synchrotron radiation storage ring BESSY -- The electronic interface for control of the dedicated synchrotron radiation storage ring BESSY -- to computing for
accelerator operation -- Man-machine interface versus full automation -- Models and simulations -- Operations and communications within the Daresbury nuclear structure facility control system -- Consoles and displays for accelerator
operation -- Operator interface to the oric control system -- Computer aided setting up of VICKSI -- GANIL beam setting methods using on-line computer codes -- A multi-processor, multi-task control structure for the CERN SPS --
Computer codes for automatic tuning of the beam transport at the Unilac -- Interactive testprogram for ion optics -- Numerical orbit calculation for a linac and improvement of its transmission efficiency of a beam -- The computerized
beam phase measurement system at GANIL its applications to the automatic isochronization in the Separated Sector Cyclotrons (SSC) and other main tuning procedures -- On-line optimization code used at Saturne -- Automatic supervision
for Saturne -- A local computer network for the experimental data acquisition at BESSY -- Closing remarks
ISBN:9783540391302
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Lecture Notes in Physics: 215
Keywords: Physics , Condensed matter , Solid state physics , Spectroscopy , Microscopy , Complexity, Computational , Physics , Condensed Matter Physics , Solid State Physics , Spectroscopy and Microscopy , Complexity
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1982-9783642886409:ONLINE Show nearby items on shelf
Title:Very Large Scale Integration (VLSI) Fundamentals and Applications
Author(s):
Date:1982
Edition:Second Corrected and Updated Edition
Size:1 online resource (304 p.)
Note:10.1007/978-3-642-88640-9
Contents:1. Introduction -- 1.1 Outlook -- 1.2 Scope of this Volume -- 1.3 Summary -- References -- 2. VLSI Device Fundamentals -- 2.1 Fundamentals of VLSI Device Improvements -- 2.2 Problem Areas for VLSIC’s -- 2.3 Small-Geometry MOS
Anomalies -- 2.4 VLSIC Projections -- 2.5 Conclusions -- References -- 3. Advanced Lithography -- 3.1 Optical Lithography -- 3.2 Electron Lithography -- 3.3 X-Ray Lithography -- 3.4 Ion Lithography -- 3.5 Conclusion -- References -- 4.
Computer Aided Design for VLSI -- 4.1 What is Computer Aided Design? -- 4.2 History -- 4.3 State-of-the-Art -- 4.4 Perspective -- 4.5 Management of Complexity -- 4.6 Structured Design -- 4.7 Functional Design Tools -- 4.8 Physical
Design Tools -- 4.9 Design Management -- 4.10 Conclusion -- References -- 5. GaAs Digital Integrated Circuits for Ultra High Speed LSI/VLSI -- 5.1 Performance Advantages Expected for GaAs ICs -- 5.2 Circuit Approaches for GaAs Digital
Logic ICs -- 5.3 GaAs Integrated Circuits: Fabrication Technology -- 5.4 Performance Results for GaAs Digital ICs -- 5.5 Summary, Conclusions and Projections -- Appendix: Nonlinear Switching Analysis for PD?d -- Dependence on ?d and
FET K-Value -- References -- 6. VLSI Architecture -- 6.1 VLSI Technology Basis -- 6.2 VLSI Device Architecture -- 6.3 VLSI System Architecture -- 6.4 VLSI Architecture Case Study -- 6.5 Conclusion -- References -- 7. VLSI Applications
and Testing -- 7.1 VLSI Applications -- 7.2 VLSI Testing -- 7.3 Conclusion -- References -- 8. VHSIC Technology and Systems -- 8.1 IC Progress -- 8.2 Throughput Capacity -- 8.3 Defense Systems -- 8.4 The VHSIC Program -- 8.5 Example
Brassboard Systems -- 8.6 Scaling to Smaller Dimensions: Benefits and Barriers -- 8.7 Computer-Aided Design -- 8.8 Testing -- 8.9 Substrates -- 8.10 Summary -- References -- 9. VLSI in Other Countries -- 9.1 Past Major Semi conductor
Programs -- 9.2 Present National Semiconductor Programs -- 9.3 Future Prospects -- References -- Additional References -- Additional References
ISBN:9783642886409
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Springer Series in Electrophysics: 5
Keywords: Engineering , Computational intelligence , Electronics , Microelectronics , Engineering , Electronics and Microelectronics, Instrumentation , Computational Intelligence
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1982-9783642618239:ONLINE Show nearby items on shelf
Title:Identifiability of State Space Models with applications to transformation systems
Author(s): Eric Walter
Date:1982
Size:1 online resource (216 p.)
Note:10.1007/978-3-642-61823-9
Contents:1. Transformation Systems -- 1.1 Introduction -- 1.2 Formalism -- 1.3 An example: nonlinear chemical kinetics -- 1.4 Specific problems of transformation system modelling -- 1.5 Conclusion -- 2. Structural Properties and Main
Approaches to Checking Them -- 2.1 Introduction -- 2.2 Definitions -- 2.3 Practical methods for checking structural observability and structural controllability of linear models -- 2.4 Main approaches to structural identifiability --
2.5 Conclusion -- 3. Local Identifiability -- 3.1 Introduction -- 3.2 Methods -- 3.3 Linear models -- 3.4 Computer aided design of models -- 3.5 Implementation for linear transformation systems -- 3.6 Conclusion -- 4. Global
Identifiability of Linear Models -- 4.1 Introduction -- 4.2 Properties of the transition matrix -- 4.3 Parametrization of the transition matrix -- 4.4 Application to checking s.g. identifiability -- 4.5 Conclusion -- 5. Exhaustive
Modelling for Linear Models -- 5.1 Introduction -- 5.2 Class of the studied models -- 5.3 The matrices B and C are known -- 5.4 The matrices B and C are partially unknown -- 5.5 Connections with Kalman’s canonical form -- 5.6
Applications of exhaustive modelling -- 5.7 Conclusion -- 6. Examples -- 6.1 Introduction -- 6.2 Chemotherapeutic model -- 6.3 Hepatobiliary kinetics of B.S.P. -- 6.4 Metabolism of iodine -- 6.5 Systemic distribution of Vincamine --
6.6 Conclusion -- 7. Global Identifiability of Nonlinear Models -- 7.1 Introduction -- 7.2 Series expansion approach -- 7.3 Linearization approach -- 7.4 Conclusion -- Conclusion -- References
ISBN:9783642618239
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Lecture Notes in Biomathematics: 46
Keywords: Mathematics , Mathematical models , Biomathematics , Statistics , Mathematics , Mathematical and Computational Biology , Mathematical Modeling and Industrial Mathematics , Statistics for Life Sciences, Medicine, Health Sciences
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1982-9781468411379:ONLINE Show nearby items on shelf
Title:Acoustical Imaging
Author(s):
Date:1982
Size:1 online resource (658 p.)
Note:10.1007/978-1-4684-1137-9
Contents:Imaging Systems -- Scanning Acoustic Microscopy of Solid Objects Using Aspheric Lenses -- A Digital Processing System for Acousto-optic Visualization of Sound Fields -- Acoustical Imaging Using Focalization under Oblique Incidence
through and Interface-Application to Non-destructive Testing -- Generation of Acoustical Images from the Absorption of Pulsed Microwave Energy -- A Thermoplastic Acoustical Holography Recording Device -- Two-dimensional Imaging with a
High Resolution PVF2/Si Optically-scanned Receiving Transducer -- Tissue Characterization -- An Ultrasonic Determination of Cardiac Muscle Structures -- The Application of Diffraction Analysis to Liver and Thyroid Disease -- Tissue
Parameter Measurement and Imaging -- Pulse Scattering in Dispersive Media -- An Absolute Measurement of Backscattering Coefficients for Excised Human Tissues and its Relevance to Abdominal Imaging -- Signal Processing Techniques -- The
Design And Application of Software Filters to Improve Lateral Resolution in a B-mode Ultrasonogram -- Digital Filtering of Acoustic Images -- Two-dimensional Null Processing -- Acoustic Imaging in Marine Sediment: A Multiple
Microprocessor Array Processor using the Trace Function -- Phase Error Reduction Method for a Towed Array -- Digital Enhancement of Ultrasonic Images and its Application to Non-destructive Testing of Composite Materials -- Preliminary
Results of Computer Aided Acoustic Imaging -- An Optimum Ultrasonic Imaging System Using ARMA Processing -- Acoustical Tomography -- Ultrasonic Planar Scanned Tomography -- A Comparison of Born and Rytov Approximations in Acoustic
Tomography -- Tomographie Evaluation of Sound Fields from Acousto-optic Data -- Effects of Diffraction on Ultrasonic Computer-Assisted Tomography -- Inversion Techniques -- An Exact Theory for Coherent Acoustic Probing -- Acoustical
Holography Is, At Best, Only a Partial Solution to the Inverse Scattering Problem -- Inverse Scattering, Inverse Field, and Inverse Source Theory -- Wave Equations and Inverse Solutions for Soft Tissue -- Asymptotic Ultrasonic
Inversion Based on Using More Than one Frequency -- Transducers and Arrays -- The Properties and Performance of a Si-PVF2 Optically Controlled Acoustic Point Source -- Effect of Mechanical Aberrations on the Resolution of Fresnel Zone
Plate Transducers -- Sidelobe Reduction of the Ring Array for Use in Circularly Symmetric Imaging Systems -- Anomalous Quantization Error Lobes in Phased Array Images -- Multi-element Arrays for NDE Applications -- Study of the Normal
Modes of Vibration of the Peizoelectric Transducers used in a Acoustic Imaging Applications -- New Techniques -- Linear Impulse Holography -- Acoustic Passive Remote Temperature Sensing -- The Speed of Sound as a Thermal Image CT Scan
Parameter -- Focused Acoustic Beams for Accurate Phase Measurements -- High Resolution Ultrasonic Testing System Using Dynamic Focusing and Signal Correlation -- Eddy Current Phasography -- A 50 MHZ Synthetic Focus System --
Bibliographic Index
ISBN:9781468411379
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Acoustical Imaging: 11
Keywords: Physics , Acoustics , Physics , Acoustics
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1982-9781468410983:ONLINE Show nearby items on shelf
Title:Anthropometry and Biomechanics Theory and Application
Author(s):
Date:1982
Size:1 online resource (328 p.)
Note:10.1007/978-1-4684-1098-3
Contents:Opening Address -- Postural Research — The Next Challenge to Anthropometrics and Biomechanics -- Session I: Data Acquisition Methods -- Fundamentals of Anthropometric Survey Measurement Techniques -- Evolution of the Techniques of
Data Collecting and Processing in Biometry -- Results of Large-Scale Anthropometrie Surveys -- The Human Machine in Three Dimensions: Implications for Measurement and Analysis -- An Anthropometric Data Bank: Its Hidden Dimensions --
Session II: Anthropometric Data Bases -- Present and Future Needs for Anthropometric Data Bases -- Anthropometric and Biomechanical Data Acquisition and Application to Rehabilitation Engineering -- Anthropometry of Mentally and
Physically Handicapped Persons Employed in Productive Occupations -- Progress and Prospects in Human Biometry Evolution of the Measurement Techniques and Data Handling Methods -- Session III: Models of Anthropometric Data --
Biomechanical Computer Modeling for the Design and Evaluation of Work Stations -- User Needs in Computerised Man Models -- Some Computational Problems in Developing Computerized Man-Models -- Empirical Models of Individuals and
Population Maximum Reach Capability -- Issues in the Statistical Modeling of Anthropometric Data for Workplace Design -- Session IV: Maximum Voluntary Exertion Data -- Overview of Methods to Assess Voluntary Exertions -- Postural
Considerations in Maximum Voluntary Exertion -- Standardized Strength Testing Methods for Population Descriptions -- Evaluation of Controlled Static Exertions in Various Muscle Groups -- On-Site Maximum Voluntary Exertion Measurements
and Job Evaluation -- Session V: Models of Biomechanical Data -- New Perspectives and Needs in Biomechanical Modelling -- The Development and Use of Biomechanical Strength Models -- The Validity of Biomechanical Models of Volitional
Activities -- Development of a Biomechanical Hand Model for Study of Manual Activities -- Factor Analytic Approach to Biomechanical Modeling -- Session VI: Applications I -- Workspace Evaluation and Design: USAF Drawing Board Manikins
and the Development of Cockpit Geometry Design Guides -- Somatography in Workspace Design -- A Systems Approach to Long Term Task Seating Design -- Evaluation of Chairs Used by Air Traffic Controllers of the U.S. Federal Aviation
Administration-Implications for Design -- Biomechanical and Engineering Anthropometry Considerations for the Assessment of Amputees’ Work Performance -- Session VII: Applications II -- Anthropometric and Strength Data in Tool Design --
Container and Handle Design for Manual Handling -- Application of Dynamic Testing and Anthropometic Computer Modeling in Design of an Aircraft/ Ejection Escape System -- The Collection and Application of Anthropometric Data for
Domestic and Industrial Standards -- Computer Aided Crew Station Design for the NASA Space Shuttle -- Session VIII: Future Needs and Perspectives -- Postural Considerations in Workspace Design -- Anthropometric and Biomechanical
Considerations in Government Regulations -- Extending the State of the Art in Anthropometry and Biomechanics
ISBN:9781468410983
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Nato Conference Series : 16
Keywords: Engineering , Biomedical engineering , Engineering , Biomedical Engineering
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1980-9783662010037:ONLINE Show nearby items on shelf
Title:Very Large Scale Integration (VLSI) Fundamentals and Applications
Author(s):
Date:1980
Size:1 online resource (282 p.)
Note:10.1007/978-3-662-01003-7
Contents:1. Introduction -- 1.1 Outlook -- 1.2 Scope of this Volume -- 1.3 Summary -- References -- 2. VLSI Device Fundamentals -- 2.1 Fundamentals of VLSI Device Improvements -- 2.2 Problem Areas for VLSIC’s -- 2.3 Small-Geometry MOS
Anomalies -- 2.4 VLSIC Projections -- 2.5 Conclusions -- References -- 3. Advanced Lithography -- 3.1 Optical Lithography -- 3.2 Electron Lithography -- 3.3 X-Ray Lithography -- 3.4 Ion Lithography -- 3.5 Conclusion -- References -- 4.
Computer Aided Design for VLSI -- 4.1 What is Computer Aided Design? -- 4.2 History -- 4.3 State-of-the-Art -- 4.4 Perspective -- 4.5 Management of Complexity -- 4.6 Structured Design -- 4.7 Functional Design Tools -- 4.8 Physical
Design Tools -- 4.9 Design Management -- 4.10 Conclusion -- References -- 5. GaAs Digital Integrated Circuits for Ultra High Speed LSI/VLSI -- 5.1 Performance Advantages Expected for GaAs ICs -- 5.2 Circuit Approaches for GaAs Digital
Logic ICs -- 5.3 GaAs Integrated Circuits: Fabrication Technology -- 5.4 Performance Results for GaAs Digital ICs -- 5.5 Summary, Conclusions and Projections -- Appendix: Nonlinear Switching Analysis for PDt Dependence on ?d and FET
K-Value -- References -- 6. VLSI Architecture -- 6.1 VLSI Technology Basis -- 6.2 VLSI Device Architecture -- 6.3 VLSI System Architecture -- 6.4 VLSI Architecture Case Study -- 6.5 Conclusion -- References -- 7. VLSI Applications and
Testing -- 7.1 VLSI Applications -- 7.2 VLSI Testing -- 7.3 Conclusion -- References -- 8. VLSI in Other Countries -- 8.1 Past Major Semiconductor Programs -- 8.2 Present National Semiconductor Programs -- 8.3 Future Prospects --
References
ISBN:9783662010037
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Springer Series in Electrophysics: 5
Keywords: Engineering , Electronics , Microelectronics , Engineering , Electronics and Microelectronics, Instrumentation
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1980-9781468410686:ONLINE Show nearby items on shelf
Title:Processing of Visible Language
Author(s):
Date:1980
Size:1 online resource (616 p.)
Note:10.1007/978-1-4684-1068-6
Contents:Principles of writing systems within the frame of visual communication (Tutorial paper) -- English shorthand systems and abbreviatory conventions: A psychological perspective -- Remarks on ancient Egyptian writing with emphasis on its
mnemonic aspects -- The Korean writing system: An alphabet? a syllabary? a logography? -- A structure for nontextual communications (Tutorial paper) -- The syntax of pictorial instructions -- Making newspaper graphs fit to print --
Some problems of illustration -- Islamic calligraphy: Meaning and symbol -- Usability: The criterion for designing written information (Tutorial paper) -- Wholistic models of feature analysis in word recognition: A critical examination
-- Developmental trends in the perception of textual cohesion -- Structuring an internal representation of text: A basis of literacy -- Graphic aspects of complex texts: Typography as macro-punctuation -- Pictures and the real thing
(Tutorial paper) -- The influence of texture gradients on relief interpretation from isopleth maps -- The acquisition and processing of cartographic information: Some preliminary experimentation -- Graph reading abilities of
thirteen-year-olds -- Interpreting directions from graphic displays: Spatial frames of reference -- The presentation of text and graphics (Tutorial paper) -- Spacing of characters on a television display -- Optimal segmentation for
sentences displayed on a video screen -- Text enhancement and structuring in computer conferencing -- Towards an electronic journal -- Human performance in computer aided writing and documentation -- Human-computer interactive systems:
A state-of-the-art review (Tutorial paper) -- Simultaneous speech transcription and TV captions for the deaf -- Pictorial recognition and teaching the blind to draw -- Telidon Videotex and user-related issues -- Human factors and VDT
design -- Theory of representation: Three questions (Tutorial paper) -- Textual literacy: An outline sketch of psychological research on reading and writing -- Anaphoric relations, comprehension and readability -- Communicating with
computers -- Towards a model for picture and word processing -- The basic test of the graph: A matrix theory of graph construction and cartography -- Name index
ISBN:9781468410686
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Nato Conference Series : 13
Keywords: Psychology , Cognitive psychology , Psychology , Cognitive Psychology
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1979-9783642008009:ONLINE Show nearby items on shelf
Title:Engineering Optimization
Author(s):
Date:1979
Size:1 online resource (208 p.)
Note:10.1007/BFb0120855
Contents:Optimization of electrical circuits -- Optimization in water distribution systems engineering -- Optimal design of pipeline networks carrying homogeneous coal slurry -- Optimal sizing of large engineering systems by separable duals --
Application of mathematical programming to metal cutting -- Optimal design methodology for a wind power system -- Some operations research approaches to automobile gear train design -- Preliminary airplane design aided by mathematical
optimization -- Mathematical programming and the optimization of computer simulations
ISBN:9783642008009
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Mathematical Programming Studies: 11
Keywords: Mathematics , Computer science , Mathematical optimization , Mathematics , Optimization , Mathematics of Computing
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Cover
Image
Call number:SPRINGER-1979-9781468409949:ONLINE Show nearby items on shelf
Title:Processing of Visible Language
Author(s):
Date:1979
Size:1 online resource (537 p.)
Note:10.1007/978-1-4684-0994-9
Contents:Eye Movements in Search and Reading -- The Control of Eye Movements in Reading (Tutorial Paper) -- On the Role and Control of Eye Movements in Reading -- Moment to Moment Control of Eye Saccades as a Function of Textual Parameters in
Reading -- Eye Movements in Reading: Eye Guidance and Integration -- Understanding the Reading Process through the Use of Transformed Typography: PSG, CSG and Automaticity -- Reading and Searching through Geometrically Transformed Text
-- Reading Eye Movements, Macro-structure and Comprehension Processes -- Design of Graphic Language -- A Schema for the Study of Graphic Language (Tutorial Paper) -- Typography: A Technique of Making a Text ‘Legible’ -- Making Maps
Easy to Read- - A Summary of Research -- Typographic Access Structures for Educational Texts -- The Use of Visual Cues in Text -- Relations between the Qualifications of Different Groups of Readers and Different Aspects of Text -- Word
Perception and its Role in Reading -- Word Recognition in Reading (Tutorial Paper) -- Facilitation in Word Recognition: Experiments Causing Change in the Logogen Model -- Word Knowledge and Letter Recognition as Determinants of Word
Recognition -- Orthographic Regularities in English Words -- Rule-governed and Wholistic Encoding Processes in Word Perception -- Spelling Patterns, Letter Cancellation and the Processing of Text -- Perceiving and Producing -- Reading
and Listening (Tutorial Paper) -- Working Memory and Reading -- A Direct Access from Graphics to Meaning: A Study of the Stroop Effect in Sentences -- Reading by Eye and Writing by Ear -- A Comparison of Explicit and Implicit Knowledge
of an Alphabet -- The Perception of Language Cohesion during Fluent Reading -- When Two No’s Nearly Make a Yes: A Study of Conditional Imperatives -- Styles and Strategies in Silent Reading -- Technological Media Designed for Visual
Presentation -- The Design of Technological Displays (Tutorial Paper) -- Electronic Paperwork Processing in the Office of the Future -- Television Text: First Experience with a New Medium -- Non-serial Language -- Paragraphs of
Pictographs: The Use of Non-verbal Instructions for Equipment -- Computer Aided Design of Graphic Symbols -- Name Index
ISBN:9781468409949
Series:eBooks
Series:SpringerLink (Online service)
Series:Springer eBooks
Series:Nato Conference Series : 13
Keywords: Psychology , Cognitive psychology , Psychology , Cognitive Psychology
Availability:Click here to see Library holdings or inquire at Circ Desk (x3401)
Click to reserve this book Be sure to include your ID please.
More info:Amazon.com
More info: Barnes and Noble
Full Text:Click here
Location: ONLINE

Return to the Fermilab Library catalog